Home > Not Working > Focusrite Scarlett 2i2 Microphone Not Working

Focusrite Scarlett 2i2 Microphone Not Working


share|improve this answer answered Jun 21 '14 at 17:42 h22 2,63511137 this is not a high-end microphone. –dwoz Aug 27 '15 at 2:23 Everything is relative. To avoid this issue you need to know the limits of your mic. If this is not the case, if your mic doesn't have explicit maintenance procedures and instructions that can be easily performed by you and are specifically designed to be performed by I've tried stereo and mono 1 and 2 and still no signal. http://nanextechnologies.com/not-working/microphone-not-working-mac.html

What point on the main land of The Netherlands is furthest away from any buildings? Mixing and mastering services? Open your interface's control panel and you should have a mixer there.ALL MY SETTINGS IN THE INTERFACE MIXER APPEAR TO BE OK...everything is the same as I've been using...levels aren't panned When I plug in my USB microphone, all my sound disables and I cannot hear anything. http://forum.cockos.com/showthread.php?t=118204

Focusrite Scarlett 2i2 Microphone Not Working

You need to buy the mic designed for computer sound card input or USB input. Open your audio preferences and check "Software monitoring" in the Devices tab. "open AUDIO PREFERENCES...do you mean in the software or in my system settings?Go back to your audio track channel Third, be sure you do not have too many USB devices plugged in simultaneously. What are your expectations of usage of a shotgun mic as far as where the mic will be positioned relative to the sound source?

Log in om je mening te geven. I looked at the specs for the mic input of the HDC-TM90 and it appears to have adequate gain for a condenser mic > -70 dBV (Mic sensitivity -50 dB equivalent, A detailed description of the problem. 4. How To Use A Condenser Mic Without Phantom Power But of course, there might be other reasons that are the root causes of the problems.

Inloggen Transcript Statistieken Vertalingen toevoegen 18.814 weergaven 113 Vind je dit een leuke video? Condenser Mic Not Working Bring then pan controls to the center. In actual use, it has an effect similar to that of using a shockmount, in that it eliminates low-end rumble and similar noise. have a peek at this web-site bastiaan - the warranty is only good for a year, and i've had this thing for well over 2 year, maybe even 3.

the mic worked there of course. Focusrite Scarlett 2i2 Not Lighting Up Read the manual on how the pattern could be changed, this is not obvious from the picture. Make sure phantom power is on. You can not post a blank message.

Condenser Mic Not Working

United States Copyright © Apple Inc.

Therefore, a microphone always requires a preamp that amplifies its low level output to line level. Focusrite Scarlett 2i2 Microphone Not Working Cakewalk SUCKS, I had so many probalems with it when I tried running M-Audio and Ardvark hardware with it. Scarlett 2i2 Microphone Setup What is a low-cut filter?

You may want to get an external preamp for better sound quality, later on. Get More Info The microphone did not come with a manual. Fixing this tends to be easy, but not easy enough for you to do. How to avoid a useless return in a Java method Could a creature have eyes that change color based off of mood? Phantom Power Not Working

Can Phantom Power Harm Dynamic Microphones? I get a signal on the interface but can only hear it in one side of the headphones and nothing in GB. Condensers, like in your case, are very delicate (for better and for worse, since that's what gives them their smooth freq response in the highs, that's also what makes them so useful reference Open your interface's control panel and you should have a mixer there.ALL MY SETTINGS IN THE INTERFACE MIXER APPEAR TO BE OK...everything is the same as I've been using...levels aren't panned

Safe Subscribe BROADCAST PRO A/V CABLES & CONNECTORS OPTICAL SYSTEMS How To Connect Condenser Mic To Computer Please refer to your recording software's owner's manual for the proper settings to accomplish this. Bazzle05-31-2004, 11:18 AMIs there maybe an on/ off switch on the mic?


  1. The sound board was designed, as most are, to accommodate a condenser mic.
  2. There are two 22mm capsules in an XY pattern for direct stereo recording.
  3. Register Help Remember Me?

Try plugging the speakers into the L/R STEREO OUTPUTS or headphone output of the Audiogram. Luckily, Ive upgraded the car. Vlad 180.362 weergaven 3:02 Does Phantom Power Improve Your Condenser Mics Audio? - Duur: 5:44. At2020 Xlr Not Working Laden...

Who can I contact if I need additional help? Next step is to stop using direct-monitoring and monitor through Logic. Now, you can control how audio is routed with direct-monitoring. this page Phantom power is typically not harmful to microphones that do not require it.

If you can not audition a microphone, we have a new feature on our website to sort the microphones by application. Now, you can control how audio is routed with direct-monitoring. A USB microphone makes recording to the computer simple. The max SPL of your mic was measured in very specific, controlled conditions.

Click either on I (input-monitor) or R (record) to hear your audio.IT'S WEIRD BECAUSE I HAVEN'T CHANGED ANYTHING FROM THE SETTINGS THAT WORKED WITH USING THE LINE IN JACK BUT NOW Try mono channel 1 and mono channel 2.Also try Channel No.5 Doesn't sound good, but smells good Fox Dec 27, 2008 2:36 AM Helpful (0) Reply options Link to this post Likely best to return it. Maybe you can even swap (shop takes faulty one, you get a brandspanking new one) doomsdayvirus06-01-2004, 01:11 PMkeith - it's xlr to xlr.